No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Stack Competition Delay

Configuring the Stack Competition Delay


During a stack restart, the startup time of member switches varies. If the startup time difference is large and the previous master switch starts slowly, it may become the standby switch after restarting. To prevent this problem, before the stack restart, configure the stack competition delay for the switches that start quickly so that stack competition begins after the switch that starts slowly finishes starting.


  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the stack member member-id competition-delay delay-time command to configure the stack competition delay.

    By default, the stack competition delay is 0 seconds.


    This command can be executed only when the stacking function has been enabled.

  4. Run the commit command to commit the configuration.
Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 43922

Downloads: 131

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next