No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stack Login

Stack Login

After a stack is set up, the member switches are virtualized into one device on the network, and all resources on the member switches are managed by the master switch. You can log in to the stack from any member switch to manage and maintain the entire stack. When you log in to a stack, you actually log in to the master switch, regardless of what login method you use and which member switch you have logged in to.

You can log in to a stack using the following methods:
  • Local login: Log in through the console interface of any member switch.

  • Remote login: Log in through the management interface or another Layer 3 interface of any member switch, using remote login protocols such as Telnet and STelnet.

    • After a stack is set up, the configuration file of the master switch takes effect in the stack. Therefore, you must specify the IP address of the master switch when logging in to the stack remotely.

    • If multiple management interfaces are available in a stack, only one management interface takes effect.

Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 44042

Downloads: 131

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next