No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Stacking Function

Enabling the Stacking Function

Context

Before enabling the stacking function on a switch, run the display stack configuration command to check the stack configuration. Enable the stacking function after you verify that the stack configuration is correct.

The switch restarts after you enable or disable the stacking function. Before the restart, the switch backs up the running configuration in flash:/ and names the backup configuration file by adding the file backup time (in the yyyymmddhhmmss format) to the original configuration file name. For example, if the original configuration file is vrpcfg.cfg and you enable the stacking function at 11:17:16 on 2012-12-11, the backup configuration file is named vrpcfg20121211111716.cfg.

After you disable the stacking function, the switch restarts without a configuration file.

Procedure

  1. Run the save command to save the configurations.
  2. Run the system-view command to enter the system view.
  3. Run the stack command to enter the stack management view.
  4. Run the stack enable command to enable the stacking function.

    By default, the stacking function is disabled.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 43571

Downloads: 130

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next