No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Making a Stack Plan

Making a Stack Plan

Before setting up a stack, you are advised to make a proper stack plan and then connect member switches using cables and complete software configuration. The stack plan includes:
  • Determine member IDs of member switches.

    In a stack, member switches are identified and managed using member IDs. Before adding switches to a stack, determine their member IDs to ensure that these member IDs are unique.

  • Determine roles of member switches.

    You can specify a member switch as the master switch based on requirements. To achieve this purpose, set a higher stack priority for this member switch during software configuration. This setting ensures that it competes to be the master switch during role election. For details about role election, see Stack Setup.

  • Determine a stack domain ID.

    Ensure that this stack domain ID is unique among all stack domain IDs on the network.

  • Determine the stack connection mode and ports used for stack connections.

    You can determine the stack connection mode and ports used for stack connections based on reliability requirements and card information. For details about the stack connection mode, see Stack Connection Modes.

Before making a stack plan, see Licensing Requirements and Limitations for Stacks to learn stack configuration requirements.

Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 43753

Downloads: 130

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next