No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Stack MAC Address

Configuring the Stack MAC Address


By default, a stack's MAC address is the MAC address of the master switch elected when the stack is set up. However, the stack MAC address may change after the stack restarts. To retain the stack MAC address, set the stack MAC address to the MAC address of a member switch. The stack then uses the same MAC address every time it restarts.


  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the set system mac-address chassis chassis-id command to configure the stack MAC address.

    If the current stack MAC address is different from the one configured using this command, the stack MAC address is changed to the configured one immediately after the command is executed.

Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 44037

Downloads: 131

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next