No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Virtualization

CloudEngine 12800 and 12800E V200R002C50

This document describes the configurations of virtualization, including stack and VS.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Stack Single-Link Alarm

Enabling the Stack Single-Link Alarm

Context

In a stack set up using MPUs, if there is only one Up SIP link between two member switches, the stack has low reliability and is more likely to split. By default, a stack sends a single-link alarm to indicate a risk. If you do not focus on this alarm, disable the alarm.

NOTE:

This function can be configured only when the stack connection mode is MPU connection.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the stack alarm single-link enable command to enable the stack single-link alarm.

    By default, the stack single-link alarm is enabled.

    NOTE:

    This command can be executed only when the stacking function has been enabled.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166610

Views: 44271

Downloads: 131

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next