No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Status of the Device ID Indicator

Configuring the Status of the Device ID Indicator

Context

When users need to locate and repair a device, you can run the set device id-led command to remotely set the status of the device ID indicator to help onsite users quickly find the device.

Procedure

  1. (Optional) Run display device id-led

    The status of the device ID indicator is displayed.

  2. Run set device id-led { on | off } [ slot slot-id ]

    The status of the device ID indicator is set.

    By default, the status of the device ID indicator is off, that is, the indicator is off.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166632

Views: 81616

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next