No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Limiting the Number of Local Dynamic NTP Sessions

Limiting the Number of Local Dynamic NTP Sessions

Prerequisites

All configurations of basic NTP functions have been completed.

Context

In both unicast client/server mode and symmetric peer mode, command lines are used to establish a connection, which is a static session. Dynamic sessions are established in broadcast mode, manycast mode and multicast mode, so that the limit on the number of local dynamic sessions takes effect.

NOTE:

The ntp max-dynamic-sessions command runs without affecting the existing NTP sessions. When the number of local dynamic NTP sessions exceeds the maximum number, a new session cannot be established.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ntp max-dynamic-sessions number

    The number of local dynamic sessions that can be established is configured.

    By default, a maximum of 100 NTP dynamic sessions can be established.

  3. Run commit

    The configuration is committed.

Verifying the Configuration

  • Run the display current-configuration | include ntp command to check the number of local dynamic sessions that can be established.
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166632

Views: 81029

Downloads: 310

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next