No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting a Device or Subcard

Resetting a Device or Subcard


When a device or subcard cannot work properly, you can reset the device or subcard.


Only the CE8860EI supports the reset of subcards.

Resetting a device or subcard will interrupt services. When a device or subcard is not working properly, try to rectify the fault before resetting the device or subcard, preventing services from being affected.


  1. (Optional) Run display device

    The device status is displayed.

  2. Run reset slot slot-id [ card card-id ]

    The device or subcard is reset.

Updated: 2019-03-21

Document ID: EDOC1000166632

Views: 81673

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next