No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Memory Usage Alarm Threshold

Configuring the Memory Usage Alarm Threshold

Context

Memory usage is an important indicator used to evaluate device performance. A high memory usage will cause service faults. During data processing, if the device can generate an alarm when high memory usage occurs, you can effectively monitor memory usage and optimize system performance to ensure system stability. To implement this function, you can set two thresholds:

  • Memory usage alarm threshold

    When memory usage reaches this threshold, the system generates an alarm.

  • Memory usage alarm recovery threshold

    When memory usage falls below this threshold, the system clears the alarm.

Procedure

  1. (Optional) Run display memory threshold [ slot slot-id ]

    The memory usage configuration is displayed.

  2. Run system-view

    The system view is displayed.

  3. Run set memory threshold threshold-value [ restore restore-threshold-value ] [ slot slot-id ]

    The memory usage alarm threshold and memory usage alarm recovery threshold are set.

    By default, the memory usage alarm threshold is 95% and the memory usage alarm recovery threshold is 75%.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166632

Views: 81539

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next