No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for NTP

Application Scenarios for NTP

Typical Application

On the network shown in Figure 4-8, SwitchA accessing a standard clock is used as the NTP master clock server to synchronize clocks on the entire network. SwitchA is configured as the unicast server, and SwitchB, SwitchC and SwitchD are configured as unicast clients. SwitchE acts as a symmetric peer of the upstream SwitchB and downstream SwitchF.

Figure 4-8 Typical networking

Application in VPN Networking

NTP supports time synchronization on an MPLS VPN network. Specifically, network devices (CE and PE) at different geographical locations can achieve time synchronization through NTP as long as they belong to the same VPN.

Figure 4-9 shows the application of the NTP service on a VPN network. Both CE A and CE B belong to VPN 2. CE B is used as an NTP unicast server, CE A is used as an NTP unicast client, and NTP time synchronization can be implemented between the two devices.

Figure 4-9 NTP application in VPN networking

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166632

Views: 81335

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next