No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPv4 Protocol Suite

IPv4 Protocol Suite

Internet Protocol Version 4 (IPv4) is the core protocol in the TCP/IP protocol suite. IPv4 protocol suite includes Address Resolution Protocol (ARP), Reverse Address Resolution Protocol (RARP), Internet Control Message Protocol (ICMP), Transmission Control Protocol (TCP), and User Datagram Protocol (UDP).

Figure 1-1  IPv4 protocol suite

As shown in Figure 1-1, ARP and RARP work between the data link layer and the network layer for address resolution. ICMP works between the network layer and the transport layer to ensure correct forwarding of IP datagrams.

ARP

ARP maps an IP address to a MAC address. ARP can be implemented in dynamic or static mode. ARP provides some extended functions, such as proxy ARP, gratuitous ARP, ARP security, and ARP-Ping.

RARP

RARP maps a MAC address to an IP address.

ICMP

ICMP works at the network layer to ensure correct forwarding of IP datagrams. ICMP allows hosts and devices to report errors during packet transmission. An ICMP message is encapsulated in an IP datagram as the data, and a header is added to the ICMP message to form an IP datagram.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166635

Views: 130494

Downloads: 284

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next