No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Layer 2 Proxy ARP Configuration

Verifying the Layer 2 Proxy ARP Configuration

Procedure

  • Run the display arp l2-proxy vlan vlan-id [ ip ip-address | conflict user ] command to check the learned Layer 2 proxy ARP entries in the VLAN.

    NOTE:
    CE6880EI does not support the command.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166635

Views: 131114

Downloads: 284

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next