No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Fragmentation of IPv4 Packets

Configuring Fragmentation of IPv4 Packets


If the length of an IPv4 packet exceeds the MTU on an interface, the packet will be discarded during transmission on the network. To solve this problem, enable fragmentation of IPv4 packets.


Only the CE6880EI supports this function.


  1. Run system-view

    The system view is displayed.

  2. Run ip fragment enable

    Fragmentation of IPv4 packets is enabled.

    By default, fragmentation of IPv4 packets is disabled.

  3. (Optional) Run ipv4 forwarding reassembling timeout time

    The reassembly timeout period of IPv4 fragmented packets is set.

    By default, the reassembly timeout period of IPv4 fragmented packets is 100 ms.

  4. Run commit

    The configuration is committed.

Updated: 2019-03-21

Document ID: EDOC1000166635

Views: 136910

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next