No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disable the Device from Responding to TC packets

Disable the Device from Responding to TC packets

Context

After the device on a ring network is disabled from responding to TC packets, the device will not age or delete ARP entries after receiving TC packets, reducing resource consumptions caused by frequent ARP entry updates and minimizing adverse impacts on user services.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run arp topology-change disable

    The device is disabled from responding to TC packets.

    By default, the device responds to TC packets, so the device ages or deletes ARP entries after receiving a TC packet.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166635

Views: 137468

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next