No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
UDP Helper Configuration

UDP Helper Configuration

This chapter describes the implementation and configuration of UDP helper, and provides configuration examples.


CE6880EI does not support this function.

The CE6810LI does not support IPv4 Layer 3 forwarding. After the IPv4 function is enabled on an interface of the CE6810LI, the configured IPv4 address can only be used to manage the switch.

Updated: 2019-03-21

Document ID: EDOC1000166635

Views: 137299

Downloads: 287

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next