Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IP Performance Configuration
Procedure
- Run the display tcp status [ local-ip ipv4-address ] [ local-port local-port-number ] [ remote-ip ipv4-address ] [ remote-port remote-port-number ] [ cid cid ] [ socket-id socket-id ] command to view TCP connection status.
- Run the display udp status [ local-ip ipv4-address ] [ local-port local-port-number ] [ remote-ip ipv4-address ] [ remote-port remote-port-number ] [ cid cid ] [ socket-id socket-id ] command to view UDP connection status.
- Run the display icmp statistics [ interface interface-type interface-number ] command to view the ICMP traffic statistics.
- Run the display forward mode command to check the configured and currently used packet
forwarding modes.
![]()
NOTE: The CE6870EI does not support this command.
- Run the display forward layer-3 command to check the currently used and configured hash modes
of the Layer 3 forwarding table.
![]()
NOTE: The CE6870EI and CE6880EI do not support this command.
Previous
