No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - QoS

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Traffic Shaping Configuration

Verifying the Traffic Shaping Configuration


  • Run the display qos queue statistics interface interface-type interface-number [ verbose ] command to check statistics about interface queues.


    Only the CE6870EI supports the verbose parameter.

  • Run the display qos configuration { interface [ interface-type interface-number ] | vlan [ vlan-id ] } command to check all the QoS configurations on an interface or a VLAN.


    Only the CE6870EI supports vlan [ vlan-id ].

Updated: 2019-03-21

Document ID: EDOC1000166640

Views: 47651

Downloads: 219

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next