No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - QoS

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Traffic Policing

Configuring Traffic Policing

Pre-configuration Tasks

Modular QoS Command-Line Interface (MQC) can be used to implement traffic policing that limits the rate of packets matching configured rules. If the total rate of all traffic also needs to be limited, configure hierarchical traffic policing after configuring MQC-based traffic policing.

Before configuring traffic policing on an interface, configure link layer attributes of the interface to ensure that the interface works properly.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166640

Views: 47009

Downloads: 219

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next