No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - QoS

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Traffic Policy

Configuring a Traffic Policy

Pre-configuration Tasks

Before configuring a traffic policy, complete the following tasks:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic policy policy-name

    A traffic policy is created and the traffic policy view is displayed, or the view of an existing traffic policy is displayed.

  3. Run classifier classifier-name behavior behavior-name [ precedence precedence-value ]

    A traffic behavior is bound to a traffic classifier in the traffic policy.

  4. Run commit

    The configuration is committed.

  5. Run quit

    Exit from the traffic policy view.

  6. Run quit

    Exit from the system view.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166640

Views: 46950

Downloads: 219

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next