No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - QoS

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Priority Mapping

Overview of Priority Mapping

Priority mapping is a method of translating Quality of Service (QoS) precedence fields carried in packets into internal priorities on a device. These internal priorities, also called local priorities, are used to differentiate classes of service for packets. After priority mapping is configured, the device provides differentiated services for packets based on the internal priorities.

Packets transmitted over different networks carry different QoS precedence fields. For example, an 802.1p field is used on a virtual local area network (VLAN), an EXP field is used on an MPLS network, and aDSCP field is used on an IP network. If packets traverse different types of networks, priority mapping must be configured on network devices to retain priorities of packets. A device that connects different types of networks maps the external precedence fields (such as 802.1p, MPLS EXP, and DSCP) of all the received packets to internal priorities. When the device sends packets, it maps internal priorities to external priorities.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166640

Views: 47828

Downloads: 219

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next