No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - QoS

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Mapping Between a CoS and a Queue Index

(Optional) Configuring the Mapping Between a CoS and a Queue Index


A device schedules packets based on queues. After packet priorities are mapped to CoS values (PHBs), the device sends packets to queues based on the mapping between CoS values and queue indexes. This enables the device to provide packets with differentiated services.

By default, CoS values and port queues are mapped in one-to-one mode. In practice, packets with two or more CoS values are scheduled in the same queue to conserve buffer resources on the device. The device sends packets to different port queues based on the internal priority, and performs traffic shaping, congestion avoidance, and queue scheduling for the queues.


  1. Run system-view

    The system view is displayed.

  2. Run qos local-precedence-queue-map local-precedence queue-index

    The mapping between PHBs and queues is configured.

    For the default mappings between CoS values and queue indexes, see Mappings between CoS values and queues.

  3. Run commit

    The configuration is committed.

Updated: 2019-03-21

Document ID: EDOC1000166640

Views: 51897

Downloads: 221

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next