No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - QoS

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, and ACL-based simplified traffic policy.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MQC Configuration

Verifying the MQC Configuration

Procedure

  • Run the display traffic classifier [ classifier-name ] command to check the traffic classifier configuration.
  • Run the display traffic behavior [ behavior-name ] command to check the traffic behavior configuration on the device.
  • Run the display traffic policy [ policy-name [ classifier classifier-name ] ] command to check the traffic policy configuration.

  • Run the display traffic-policy applied-record [ policy-name ] [ global [ slot slot-id ] | interface interface-type interface-number | vlan vlan-id | vpn-instance vpn-instance-name | qos group group-id | bridge-domain bd-id ] [ inbound | outbound ] command to check the application records of a specified traffic policy.

    NOTE:
    • The CE6810LI does not support the vpn-instance vpn-instance-name parameter.
    • The CE5810EI, CE5850EI, CE5850HI, CE5855EI, CE6810LI, and CE6810EI do not support the bridge-domain bd-id command.
  • Run the display system tcam fail-record [ slot slot-id ] command to display TCAM delivery failures.
  • Run the display system tcam service brief [ slot slot-id ] command to display the group index and rule count occupied by different services.
  • Run the display system tcam service { cpcar slot slot-id | service-name slot slot-id [ chip chip-id ] } command to display IDs of entries delivered by services on the specified chip or in the specified slot.
  • (Models excluding the CE6870EI and CE6880EI) Run the display system tcam match-rules slot slot-id [ [ ingress | egress | group group-id ] | [ delay-time time-value ] ] * command to display matched entries.
  • (For the CE6870EI) Run the display system tcam match-rules slot slot-id [ [ ingress | egress | group group-id ] | [ chip chip-id ] ] * command to display matched entries.
  • (For the CE6880EI) Run the display system tcam match-rules slot slot-id chip chip-id index index-id command to display matched entries.
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1000166640

Views: 47761

Downloads: 219

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next