No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50 Configuration Guide - Virtualization

This document describes the configurations of virtualization, including stack and SVF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stack File System Access

Stack File System Access

To access the file system on a switch, you need to specify the root directory of the flash storage. The flash storage name on a standalone switch is different from that on a stack member switch.
  • On a standalone switch:

    flash: indicates the root directory of the flash storage on the switch.

  • In a stack:
    • flash: indicates the root directory of the flash storage on the master switch.

    • Stack member ID#flash: indicates the root directory of the flash storage on the standby switch or a slave switch. For example, 2#flash indicates the root directory of the flash storage on the member switch with stack member ID 2.

For more information about the file system, see "Overview of the File System" in the CloudEngine 8800, 7800, 6800, and 5800 Series Switches Configuration - Basic Configuration Guide.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000166645

Views: 55847

Downloads: 344

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next