No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50 Configuration Guide - Virtualization

This document describes the configurations of virtualization, including stack and SVF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maximizing the Uplink Bandwidth on a Leaf Switch

Maximizing the Uplink Bandwidth on a Leaf Switch

Context

When a leaf switch of the CE5810-24T4S-EI model is dual homed to two parent switches, by default, uplink traffic is not forwarded through the stack link between the parent switches and can only use a maximum of 20GE uplink bandwidth. If the stack link bandwidth is sufficient, you can run the leaf uplink-traffic maximize command to cancel the 20GE uplink bandwidth limit. This configuration enables the uplink traffic bandwidth to reach the maximum value of 40GE.

NOTE:

This command is only valid on the CE5810-24T4S-EI.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the leaf member member-id uplink-traffic maximize command to maximize the uplink bandwidth on a leaf switch.

    By default, the uplink bandwidth is not maximized on a leaf switch.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000166645

Views: 55639

Downloads: 344

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next