No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50 Configuration Guide - Virtualization

This document describes the configurations of virtualization, including stack and SVF.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Device Type or Serial Number of a Leaf Switch Allowed to Join an SVF System

(Optional) Configuring the Device Type or Serial Number of a Leaf Switch Allowed to Join an SVF System

Context

To prevent devices from incorrectly joining an SVF system and ensure SVF security, you can configure the device type or serial number of a leaf switch allowed to join an SVF system. When the device type or serial number of a leaf switch is consistent with the configured one, the leaf switch can join the SVF system. Otherwise, the leaf switch cannot join the SVF system.

By default, all the devices that can function as leaf switches can join an SVF system.

NOTE:

When a leaf switch has joined an SVF system, it leaves the SVF system if the changed device type or serial number is inconsistent with the configured one.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. (Optional) Configure the device type or serial number of a leaf switch allowed to Join an SVF system.

    • Run the leaf member member-id type type command to configure the device type of a leaf switch allowed to join an SVF system.

      By default, the device type of a leaf switch allowed to join an SVF system is not configured.

    • Run the leaf member member-id serial-number serial-number command to configure the serial number of a leaf switch allowed to join an SVF system.

      By default, the serial number of a leaf switch allowed to join an SVF system is not configured.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000166645

Views: 38480

Downloads: 298

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next