No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEngine 8800, 7800, 6800, and 5800 V200R002C50 Configuration Guide - Virtualization

This document describes the configurations of virtualization, including stack and SVF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Inter-Device Link Aggregation and Local Preferential Forwarding in a Stack

Inter-Device Link Aggregation and Local Preferential Forwarding in a Stack

Inter-Device Link Aggregation

A stack supports inter-device link aggregation (Eth-Trunk). That is, physical Ethernet ports on different member switches can bundle into one Eth-Trunk. The Eth-Trunk link works even when a member switch or a member link in the Eth-Trunk fails, ensuring reliable data transmission. Inter-device link aggregation prevents single-point failures in a stack and greatly improves network reliability.

In Figure 1-21, traffic sent to the core device on the network is equally distributed to member links of an Eth-Trunk between the stack member switches. If an Eth-Trunk member link fails, traffic on this link is distributed to the other link. This link backup mechanism improves network reliability.
Figure 1-21 Link backup through inter-device link aggregation
In Figure 1-22, if a member switch in the stack fails, traffic is switched to the Eth-Trunk member link on the other member switch. This device backup mechanism improves network reliability.
Figure 1-22 Device backup through inter-device link aggregation

Local Preferential Forwarding

When an inter-device Eth-Trunk is configured in a stack, the stack uses the hash algorithm to select outbound interfaces in the Eth-Trunk. Therefore, traffic received on a member switch may be forwarded through the other member switch. Inter-device forwarding consumes bandwidth on stack links. As bandwidth provided by a stack cable is limited, this forwarding mode increases loads on stack cables and reduces forwarding efficiency. Local preferential forwarding solves this problem. This function ensures that traffic reaching the local switch is preferentially forwarded through a local interface. If the local outbound interface fails, traffic is forwarded through an interface on the other member switch.

In Figure 1-23, SwitchA and SwitchB set up a stack, and their uplink and downlink interfaces are bundled to Eth-Trunk interfaces. Without the local preferential forwarding feature, traffic reaching SwitchA is load balanced between the Eth-Trunk member links. Some of traffic is forwarded through the stack cables and sent out from a physical interface on SwitchB. If local preferential forwarding is enabled, traffic reaching SwitchA is forwarded through a local physical interface.

NOTE:

This function is valid only for known unicast packets but not for unknown unicast packets, broadcast packets, and multicast packets.

Figure 1-23 Local preferential forwarding
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1000166645

Views: 55010

Downloads: 344

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next