Identifying MZ520 Ports in Windows

This section uses Windows Server 2012 R2 as an example. For details about the configuration on other OSs, see the OS documentation provided by the OS vendors.

To identify MZ520 ports in Windows Server 2012 R2, perform the following steps:

Windows Server 2012 R2 does not have the MZ520 driver. Therefore, the Network and Sharing Center window does not display the two ports of the MZ520, as shown in Figure 4-191.

Figure 4-191 Network and Sharing Center

In the Device Manager window, you can see two Ethernet controllers, which correspond to the two ports of the MZ520, as shown in Figure 4-192.

Figure 4-192 Device Manager

After the driver is installed, the two ports are displayed in the Network and sharing Center window: Ethernet, Ethernet 2, Ethernet 3, and Ethernet 4. See Figure 4-193. Ethernet maps to Port 0, and Ethernet 2 maps to Port 1.

Figure 4-193 Network and Sharing Center