Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the MZ520 Firmware Versions on Purley
To query the MZ520 NIC firmware version on Purley, perform the following steps:
- When the message shown in Figure 4-213 is displayed, press F11 to go to the front page interface.
- On the Front Page interface, choose Device Manager.Figure 4-214 Choosing Device Manager
- On the Device Manager page, select Network Device List.Figure 4-215 Choosing Network Device List
- Choose the target port on the Network Device List page to enter the detail page of the port.Figure 4-216 Choosing the target port
- Choose the port name to go to the Main Configuration Page interface.Figure 4-217 Choosing the port name
- On the Main Configuration Page interface, choose Firmware Image Menu.Figure 4-218 Choosing Firmware Image MenuThe Firmware Image Menu page is displayed. You can view the firmware versions on this page.Figure 4-219 Viewing NIC firmware versions
- The version number after Family Firmware Version is the NIC firmware version number.
- The version number after MFW is the version number of the NIC major function module.
- The version number after MBA is the version number of multiple boot agents including PXE, BOOTP, iSCSI Boot, and FCoE Boot.
- EFI is short for Extensible Firmware Interface. The version number is the NIC EFI version number.
- The CCM version number is the NIC configuration management version number.
