Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PXE
- When the following screen is displayed, press F11 to enter the Front Page screen.Figure 4-102 Pressing F11 to go to Front Page
- On the Front Page screen, select Device Manager and press Enter.Figure 4-103 Selecting Device Manager
- On the Device Manager screen, select Network Device List and press Enter.Figure 4-104 Selecting Network Device List
- Select a port and press Enter. On the displayed screen, press Enter again to confirm the selection.Figure 4-105 Selecting a portFigure 4-106 Confirming the selection
- On the Main Configuration Page screen, select Device Hardware Configuration Menu and press Enter.Figure 4-107 Selecting Device Hardware Configuration Menu
- On the Device Hardware Configuration screen, select UEFI Boot Mode, press Enter, and select UNDI to enable PXE.Figure 4-108 Selecting UEFI Boot ModeFigure 4-109 Enabling PXE.
- Press Esc repeatedly until the Front Page screen is displayed.
- Restart the compute node for the configuration to take effect.
