Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the MZ520 Legacy BIOS Firmware Versions
To query the Legacy BIOS firmware versions of the MZ520, perform the following steps:
- Power on the compute node.
- When the message in Figure 4-204 is displayed during the startup, press Ctrl+S.
The BIOS interface is displayed. You can view the NIC firmware versions in the Device List area, as shown in Figure 4-205.
- MBA is short for Multiple Boot Agent. The follow-up version number is the version number of multiple boot agents including PXE, BOOTP, iSCSI Boot, and FCoE Boot.
- CCM is short for Comprehensive Configuration Management. The follow-up version number is the NIC configuration management version number.
- In the Legacy mode, only the MBA and CCM version numbers are displayed. To obtain the Family Firmware and Management Firmware (MFW) version numbers, switch the BIOS mode to UEFI.
