Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PXE
- Select a device on the Device List screen.Figure 4-18 Selecting a device
- Select MBA Configuration and press Enter.Figure 4-19 Selecting MBA Configuration
- Set Boot Protocol to Preboot Execution Environment (PXE) to enable PXE.Figure 4-20 Enabling PXE
- (Optional) Set VLAN Mode to Enabled and set the VLAN ID for PXE.Figure 4-21 Setting the VLAN ID for PXE
- Press Esc. On the displayed Exit Configuration screen, select Exit and Save Configurations and press Enter.Figure 4-22 Saving the PXE settings
- Manually restart the server for the configurations to take effect.Figure 4-23 Prompt for restart
