Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VLANs in Windows
To configure VLANs in Windows Server 2012 R2 that has NIC drivers installed, perform the following steps:
- In Windows Server 2012 R2, open Network Manager and click a physical port (for example, Ethernet 2). Figure 4-224 Selecting a NIC port
- Click Properties. The Ethernet 2 Properties window is displayed. Figure 4-225 NIC port properties
- Click Configure. The Ethernet 2 configuration window is displayed. Figure 4-226 NIC port property configuration
- Click the Advanced tab, select VLAN ID, set Value to a number (for example, 2), and click OK. Figure 4-227 Setting the NIC port VLAN ID
Previous
