Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring FCoE for the MZ522 in Windows
To configure FCoE in Windows Server 2012 R2, perform the following steps:
- If NPAR is enabled, set the working mode of the PFs that need to use the FCoE function to FCoE (NIC+FCoE). For details, see Configuring NPAR.
If NPAR is disabled, skip this step.
- Install Ethernet and FCoE drivers in Windows Server 2012 R2. For details, see Installing and Uninstalling the MZ522 Drivers in Windows.
After the installation of Ethernet and FCoE drivers is complete, the FCoE function is available and no other configuration is required.
Previous
