Querying the MZ522 Legacy BIOS Firmware Versions
To query the legacy BIOS firmware versions of the MZ520, perform the following steps:
- Power on the compute node.
- When the message in Figure 4-193 is displayed during the startup, press Ctrl+S.
The BIOS interface is displayed. You can view the NIC firmware versions in the Device List area, as shown in Figure 4-194.Figure 4-194 Viewing the NIC firmware versions
- MBA is short for Multiple Boot Agent. The follow-up version number is the version number of multiple boot agents including PXE, BOOTP, iSCSI Boot, and FCoE Boot.
- CCM is short for Comprehensive Configuration Management. The follow-up version number is the NIC configuration management version number.
- In the Legacy mode, only the MBA and CCM version numbers are displayed. To obtain the Family Firmware and Management Firmware (MFW) version numbers, switch the BIOS mode to UEFI.