No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

D-CCAP Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Version Mapping

This topic describes the versions of the related products corresponding to the current product version for the documentation description, such as command parameters and CLI.

Product Name

Product Version

D-CCAP

V100R019C10

MA5633

V800R019C10

MA5833

V100R019C10

MA5800

V100R019C12

U2000

V200R018C60

If configuration details change in later versions, this guide will be updated and released accordingly.

Different versions may have configuration commands slightly different under the D-CCAP solution. For specific commands, see the corresponding Command Reference.

Intended Audience

The intended audience of this product description are as follows:

  • Network planning engineers

  • Installation and commissioning engineers

  • Field maintenance engineers

  • Network monitoring engineers

  • System maintenance engineers

  • Data configuration engineers

Symbol Conventions

The following symbols may be found in this document. They are defined as follows:

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Update History

Issue

Date

Description

02

2019-02-22

Added: Configuring the EQAM DVB Service on a CMC

01

2017-10-31

Based on the usage of historical versions of this document, this guide does not differentiate between R versions starting from V100R018C00. The version of this document starts from 01.

Different versions may have configuration commands slightly different under the D-CCAP solution. For specific commands, see the corresponding command guide.

Translation
Download
Updated: 2019-05-09

Document ID: EDOC1000169149

Views: 20033

Downloads: 266

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next