No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
CX920 Switch Module V100R001 User Guide 09
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Information

Default Information

Table 4-2 describes the default information of CX920.

Table 4-2 Default information

User Name

User Description

Default Password

User Type

User Status

Login Method

root

A BMC user

Huawei12#$

Administrative user

Enabled

Remote or local login

A user that logs in to the basic input/output (BIOS) Setup menu.

The user has no user name.

Huawei12#$

NOTE:
  • During system boot, you can press F5 to select your keyboard layout (French keyboard, U.S. English keyboard, or UK English keyboard).
  • The default BIOS password is Huawei12#$ for the U.S. English or French keyboard and is Huawei12£$ for the UK English keyboard.

Administrative user

Enabled

Remote or local login

NOTE:

Remote login is supported if the software version of the switching plane is 6.30 or later.

root

A user that logs in to the 10GE switching planeand40GE switching plane.

The user has no user name if over a serial port.

Huawei12#$

Administrative user

Enabled

Remote or local login

Switch modules have a virtual serial port COM1. The virtual serial port is used by the built-in software system in a switch module to manage the switch module. Note the following about the virtual serial port:

  • Users cannot log in to the virtual serial port.
  • The default password is Huawei#123.
  • Do not set or change the virtual serial port login password; otherwise, some switch module functions fail.
  • If the login password is changed, run the undo authentication-mode or undo set authentication password command to delete the new login password.
Translation
Download
Updated: 2019-12-04

Document ID: EDOC1000170901

Views: 24790

Downloads: 179

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next