No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
CX920 Switch Module V100R001 User Guide 09
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Overview

Configuration Overview

Configuration Process

Figure 4-1 Switch module configuration process
Table 4-1 Configuration process description

Step

Description

Set an IP address for the management network port.

Set the IP address for the management network port of the 10GE switching plane and 40GE switching plane.

You can log in to the CLI of the switching plane from a PC by using the IP address of the management network port.

Log in to the CLI of each switching plane.

You can log in to the 10GE switching plane and 40GE switching plane CLI over Secure Shell (SSH), Serial Over LAN (SOL), or a serial port.

Check the switching plane.

Check the following items in the 10GE switching plane and 40GE switching plane of the CX920:

  • Query versions and check whether the versions are the required ones.
  • Query alarms and check whether an alarm is generated.

Changing the Initial User Passwords

Change the initial user passwords after the first login to the CX920 to ensure the security of system operating and maintenance.

This topic describes how to change the initial user passwords of the BMC, 10GE switching plane and 40GE switching plane, and BIOS.

Add a user.

Add a user in the 10GE switching plane and 40GE switching plane of the CX920. You can log in to the switching plane CLI for routine maintenance as the new user.

Configure switch module data.

This topic describes the switching service data supported by the 10GE switching plane and 40GE switching plane of the CX920.

Back up configuration files.

Back up the configuration file of the 10GE switching plane and 40GE switching plane for the CX920. If configuration errors occur or the CX920 is faulty, you can use the backup configuration file to restore configuration data.

Related Documents

Related documents of the 10GE switching plane and 40GE switching plane in the CX920 are as follows:

  • For details about how to query 10GE switching plane and 40GE switching plane commands, see CX920 Switch Module Command Reference.
  • For details about how to configure 10GE switching plane and 40GE switching plane features, see CX920 Switch Module Configuration Guide.
  • For details about how to handle 10GE switching plane and 40GE switching plane alarms, see E9000 Server V100R001 Alarm Handling.
  • For details about how to rectify 10GE switching plane and 40GE switching plane system faults and replace the CX920, see Huawei Servers Troubleshooting.
Translation
Download
Updated: 2019-12-04

Document ID: EDOC1000170901

Views: 24674

Downloads: 179

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next