No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

CX920 Switch Module V100R001 User Guide 09
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transferring Files Using WinSCP

Transferring Files Using WinSCP

This topic describes how to transfer files on the local computer using WinSCP.



The following data has been obtained:

  • IP address of the server to be connected
  • User name and password for logging in to the server to be connected


  1. The SFTP service has been enabled on the destination device.
  2. Open the WinSCP folder, and double-click WinSCP.exe.

    The WinSCP Login dialog box is displayed, as shown in Figure 6-10.

    If the operating system (OS) is not an English system, click Languages to set the displayed language.

    Figure 6-10 WinSCP login

  3. Set the login parameters.

    The parameter descriptions are displayed as follows:

    • Host name: Specifies the IP address of the device to be connected. For example:
    • Port number: The default value is 22.
    • User name: Specifies the username. For example: admin123
    • Password: Specifies the password. For example: admin123
    • Private key file: Retain the default value None.
    • Protocol: Select the default value SFTP, and then select Allow SCP fallback.

  4. Click Login.

    The WinSCP file transfer page is displayed.

    • If a key file was not selected during the first login, a warning Continue connecting and add host key to cache is displayed. Click Yes. The WinSCP file transfer page is displayed.
    • If Windows 7 is used, in the left pane of the page, open the C:\Users\Administrator\Documents directory, the device's /root directory is opened in the right pane by default.

  5. In the left and right panes, create or delete folders, or copy folders between the left and right panes.
Updated: 2019-12-04

Document ID: EDOC1000170901

Views: 25107

Downloads: 184

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next