No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Opaque-LSA of OSPF

Enabling the Opaque-LSA of OSPF

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospf [ process-id ]

    The OSPF view is displayed.

  3. Run opaque-capability enable

    The opaque-LSA capability is enabled.

    The opaque-LSA capability of OSPF needs to be enabled first because OSPF supports GR through Type 9 LSAs.

  4. Run graceful-restart

    The OSPF GR feature is enabled.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 111718

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next