No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Network Management Function for RIP
Configuring the Network Management Function for RIP
By binding RIP to the MIB, you can view RIP information
and configure RIP through the NMS.
Pre-configuration Tasks
Before
configuring the network management function for RIP, complete the
following task:
This command is used to bind a RIP process ID to MIBs and specify
the ID of the RIP process that accepts Simple Network Management Protocol
(SNMP) requests.
Verifying the Configuration
Run the display current-configuration command to view the binding relationships of RIP.