No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic IPv6 IS-IS Functions

Configuring Basic IPv6 IS-IS Functions

An IS-IS network can be set up only after basic IS-IS functions are configured.

Pre-configuration Tasks

Before configuring basic IPv6 IS-IS functions, complete the following tasks:

  • Enabling the IPv6 forwarding capability on the device

  • Configuring IPv6 addresses for interfaces to ensure that neighboring nodes are reachable at the network layer

Configuration Procedure

Creating an IS-IS process is the prerequisite for configuring a network entity title (NET), configuring the device level, and establishing an IS-IS neighbor relationship.

Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 188975

Downloads: 316

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next