No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPF MIB Binding

Configuring OSPF MIB Binding


When multiple OSPF processes are enabled, you can configure OSPF MIB to select the process to be processed, that is, configure OSPF MIB to select the process to which it is bound.

Do as follows on the OSPF router:


  1. Run system-view

    The system view is displayed.

  2. Run ospf mib-binding process-id

    OSPF MIB binding is configured.

Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 187697

Downloads: 316

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next