No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for RIPng

Default Settings for RIPng

Table 4-2 describes the default settings for RIPng.

Table 4-2 Default settings for RIPng
Parameter Default Setting
Maximum number of equal-cost routes
  • On the AR100&AR120&AR150&AR160&AR200 series, AR1200 series, AR2201-48FE, AR2202-48FE, AR2204-27GE, AR2204-27GE-P, AR2204-51GE-P, AR2204-51GE, AR2204-51GE-R, AR2204E, AR2204E-D and AR2204 is 4.
  • on the AR2220, AR2220E, AR2204XE, AR2240(using SRU40, SRU60, SRU100E or SRU80), AR2240C, and AR3200(using SRU40, SRU60,, SRU100E or SRU80) series is 8.
  • AR2240(using SRU200, SRU200E or SRU400), AR3200(using SRU200, SRU200E or SRU400) and AR3600(using SRUX5) series is 16.
RIPng function Disabled
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 130880

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next