Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the OSPFv3 Area Configuration
Procedure
- Run the commands as follow to check the LSDB information about OSPFv3:
display ospfv3 [ process-id ] lsdb [ area area-id ] [ originate-router advertising-router-id | self-originate ] [ { router | network | inter-router [ asbr-router asbr-router-id ] | { inter-prefix | nssa } [ ipv6-address prefix-length ] | link | intra-prefix | grace } [ link-state-id ] ]
display ospfv3 [ process-id ] lsdb [ originate-router advertising-router-id | self-originate ] external [ ipv6-address prefix-length ] [ link-state-id ]
- Run the commands as follow to check the OSPFv3 routing table:
display ospfv3 [ process-id ] routing
display ospfv3 [ process-id ] routing [ abr-routes | asbr-routes | statistics [ uninstalled ] | ipv6-address prefix-length | intra-routes | inter-routes | ase-routes | nssa-routes ]
- Run the display ospfv3 [ process-id ] vlink command to check the information about OSPFv3 virtual links.
