Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring External Route Selection Rules
Context
RFC 2328 and RFC 1583 define the route selection rule differently. After OSPF is enabled on the router, specify a route selection rule based on the router configuration. The router complies with the route selection rule defined in RFC 1583 by default. If the neighboring router complies with the route selection rule defined in RFC 2328, configure the local router to comply with that defined in RFC 2328. This allows all routers in the OSPF area to comply with the same route selection rule.
Procedure
- Run system-view
The system view is displayed.
- Run ospf [ process-id ]
The OSPF process view is displayed.
- Run undo rfc1583 compatible
The router is configured to comply with the route selection rule defined in RFC 2328, not RFC 1583.
By default, the router complies with route selection rule defined in RFC 1583.
Previous
