No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic RIPng Function Configuration

Verifying the Basic RIPng Function Configuration


  • Run the display ripng [ process-id ] command to check the configuration of the RIPng process.
  • Run the display ripng process-id route command to check all the RIPng routes that are learned from other routers.
  • Run the display default-parameter ripng command to check the default RIPng configuration.
  • Run the display ripng process-id statistics interface { all | interface-type interface-number [ neighbor neighbor-ipv6-address | verbose ] } command to check statistics about RIPng interfaces.
Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 189403

Downloads: 318

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next