Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling the Receiving of RIPng Routes
To meet the requirements of complex networks, control the receiving of RIPng routes.
Pre-configuration Tasks
Before
controlling the receiving of RIPng routes, complete the following
task:
Procedure
- Run system-view
The system view is displayed.
- Run ripng [ process-id ]
The RIPng view is displayed.
- Run filter-policy { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } import
The RIPng process is configured to filter received routes.
You can use ACL6, route policy and IPv6 prefix lists to filter received RIPng routes, allowing only the routes matching ACL6, route policy and IPv6 prefix lists to be added to RIPng routing tables.
Previous
