Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPF Fast Convergence
Pre-configuration Tasks
By adjusting OSPF timers, you can implement OSPF fast network convergence.
Before configuring OSPF fast convergence, complete the following tasks:
Configuring a link layer protocol
Configuring IP addresses for interfaces to ensure that neighboring nodes are reachable at the network layer
- Setting the Convergence Priority of OSPF Routes
- Setting the Interval for Sending Hello Packets
- Setting the Dead Time of the Neighbor Relationship
- Configuring Smart-discover
- Setting the Interval for Updating LSAs
- Setting the Interval for Receiving LSAs
- Setting the Interval for the SPF Calculation
- Verifying the OSPF Fast Convergence Configuration
