No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPFv3 to Filter the Received Routes

Configuring OSPFv3 to Filter the Received Routes

Context

After receiving LSAs, OSPFv3 determines whether to add the calculated routes to the local routing table according to the filtering policy.

Do as follows on the router that runs OSPFv3.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospfv3 [ process-id ]

    The OSPFv3 view is displayed.

  3. Run filter-policy { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name } import

    OSPFv3 is configured to filter the imported routes.

    Using the filter-policy command, you can only filter the routes calculated by OSPFv3. Routes that do not pass the filtering are neither added to the OSPFv3 routing table nor advertised.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 144196

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next